Pressure Sensitive Tape Machines

Better Packages 333 Series  |  Marsh HT

150 Tapemate II Tape Dispensers

Extremely accurate - Length are set in 1/20" increments (1MM increments when set for metric calibration), plus "Random" button for longer lengths.

Versatile - Unique double pressure rolls can be set to handle just about any kind of tape without jamming or slipping. Can even dispense adhesive transfer tapes when equipped with special feed rolls.

Convenient - Cut length of tape is held ready to be taken by the operator. As soon as the tape is removed, the next piece feeds and cuts automatically. Or, when set to "Manual", the Tapemate II feeds, cuts, and holds a length for use. After the tape is removed, press the "Cycle Start" button to dispense the next length.

Safe Operation - The machine stops immediately if anything contacts the cutter assembly before it cuts the tape. Cycle continues automatically when the obstruction is removed (if the cutter is physically blocked, the machine shuts itself down to prevent damage. It must then be turned off and the blockage cleared before it can be re-started). The display window shows the status of the machine at all times.

Standard Features - All setting are retained when the Tapemate II is turned off. No need to re-program the machine each time it is turned off and restarted.

Dispensing speed is adjustable from 1 inch/sec. to 5 inches/sec.

Power feed forward and reverse for loading and unloading the machine,

112 Tape Mate Tape Dispenser

Automatically measures and feeds short lengths of PVC, masking, reinforced and other pressure-sensitive industrial tapes.
Controls tape usage to reduce waste, lower labor costs, and improve quality control.

As easy to load as a manual dispenser.

Three convenient operating modes:
• Manual - Dispenses pre-measured lengths of tape at the push of a button.
• Automatic - Advances replacement length as soon as the previous length is removed.
• Random - Continues to feed as long as the button is pressed.

Heavy steel frame with durable tan powder coat finish. Large gear motor and drive train for outstanding durability.
Length of tape can be set from 1 to 12 inches, continuous. Other length ranges available on special order.

Replacement blades, core holders, and other parts available for repair/maintenance when needed.

Handles tape rolls up to 7" in diameter on a 3" core. Other core holder diameters available on special order.